Owner`s manual

GB - 36
SYMPTOM CAUSE (AND REMEDY)
• The region number of the disc doesn't match the region number
of this unit.
• Clean the disc.
• The disc is scratched.
The picture is
not clear.
No picture.
• Make sure that you've select DVD mode.
• The system is in pause mode. Press the
PLAY button to return
to normal play mode.
• Fast forward or fast reverse is performed. Press the
PLAY
button to return to normal play mode.
• Make sure that AUDIO / VIDEO output connections are correct.
• The DTS DVD disc cannot be decoded to have speaker output.
• This unit is too hot, shut off the unit for 30 minutes to cool down.
The remote does
not function.
• Check that the AC adapter is connected.
• You did not turn on the unit.
No power.
DVD
No sound or
only a very low-
level sound is
heard.
• The plugs and jacks are dirty. Wipe them with a cloth slightly
moistened with alcohol.
• Clean the disc.
• There is no disc inside ("No Disc" appears on the screen).
• Insert the disc correctly with the playback side facing forward.
• Clean the disc.
• A non-NTSC disc has been inserted. The unit and disc region
number are incompatible.
• Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and try
again.
The disc does
not play.
Severe hum or
noise is heard.
• Remove any obstacles between the remote and the unit.
• Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace all the battery in the remote with new ones.
TROUBLE SHOOTING GUIDE