Owner`s manual

GB - 24

PLAYING A DISC

This owner’s manual explains the basic instructions of this unit. Some DVD

discs are produced in a manner that allows specific or limited operation

during playback. Such as, the unit may not respond to all operating commands.

This is not a defect in the unit. Refer to the instruction notes of discs.

“

” may appear on the screen during operation. A “ ” means that the

desired operation is not permitted by the unit or disc.

Basic playback

Pausing playback (still mode)

Press the

PAUSE button. To resume normal playback, press the PLAY button.

Each time you press the

PAUSE button, the picture advances one frame.

Stopping playback

Press the STOP button at the location where you want to interrupt playback. To

resume playback at the position where the disc was stopped, press the

PLAY

button.

If you press the

STOP button twice, the unit’s memory will be cleared and

pressing the

PLAY button will reset the disc to the beginning.

To skip to a different track

• Press the PREV button repeatedly to skip to the start of the current or

previous track.

• Press the

NEXT button to skip to the next track.

• For audio CD disc, use the number buttons (remote control only) to jump straight

to that track number.

DVD

Playing a Disc

1. Slide the POWER ON / OFF switch on the left side of unit to ON.

2. Slide the AV IN / DVD switch on the right side of unit to select DVD mode.

3. Push the OPEN switch to open the disc door.

4. Hold the disc by its sides and carefully place it onto the central spindle in the disc

compartment, with the label side facing up; press the disc down until you hear a

“click”.

5. Push the door to close.

It takes a short while for your unit to load the disc. After loading, the unit will

automatically start playing most DVDs.

6. If the DVD does not start automatically, press the

PLAY button.