Owner`s manual

E - 18

PLAYING A DISC

This owner’s manual explains the basic instructions of this unit. Some DVD discs are produced in

a manner that allows specific or limited operation during playback. As such, the unit may not

respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes

of discs.

“ ” may appear on the screen during operation. A “ ” means that the desired operation

is not permitted by the unit or disc.

Basic playback

Playing a Disc

1.Slide the POWER ON/OFF switch on the left side of unit to on mode.

2.Slide the AV IN / DVD switch on the right side of unit to select DVD mode.

See CUSTOMIZING THE FUNCTION SETTINGS (page 27 to 28) before proceeding to step 3.

3.Press the OPEN button on the unit to open the disc door.

4.Hold the disc by its sides and carefully fit in onto the central spindle in the disc compartment, with the label

side facing up; press the disc down until you hear a “click”.

5.Push the door to close.

It takes a short while for your unit to load the disc. After loading, on some discs, the unit will automatically

start playback of the disc.

6.If disc play does not start automatically, press the

PLAY button.

Pausing playback (still mode)

Press the

PAUSE button. To resume normal playback, press the PLAY button.

Stopping playback

Press the

■■

■ STOP button to interrupt playback. To resume playback, press the PLAY button.

If you press the

■■

■ STOP button twice, the unit’s memory will be cleared and pressing the

PLAY button will reset

the disc to the beginning.

To skip to a different track

• Press the PREV button repeatedly to skip to the start of the current or previous track.

• Press the

NEXT button to skip to the next track.

• For audio CD disc, use the number buttons (remote control only) to jump straight to a particular track number.

(continued to next page)(continued to next page)

(continued to next page)

DVD