User Guide

Color Management 373
To rebuild color tables using specific monitor or separations printer profiles:
1 Display colors preferences by doing one of the following:
• In Windows, press Control+U, then click the Colors tab.
• On the Macintosh, press Command+U, then click the Colors category.
2 Select Kodak Digital Science or Apple ColorSync from the color management type
pop-up menu.
3 Select Rebuild Color Tables to automatically rebuild the default color tables according to the
Color Management System you selected in step 2.
4 Click Setup.
5 In the Color Management Setup dialog box, for Monitor select an ICC-compatible monitor
profile to be used for managing color on your monitor.
6 For Separations Printer, select a printer profile to be used for printing color separations.
7 Click OK to close the Color Management Setup dialog box.
8 Click OK to close the Preferences dialog box and rebuild the color tables.
9 Redisplay colors preferences by doing one of the following:
• In Windows, press Control+U, then click the Colors tab.
• On the Macintosh, press Command+U, then click the Colors category.
10 In the Preferences dialog box, under Color Management, select Color Tables from the color
management type pop-up menu.
Note: The monitor and separations printer profiles you selected in steps 5 and 6 do not appear under the Color
Management options for Color Tables. However, FreeHand will use the profiles you selected in performing color
adjustments.
11 Click OK to close the Preferences dialog box.