User Guide

8. Press “Return.”
You have probably noticed that a three-dimensional box or
cube is being created. The previous set of steps created
the right side of cube. The next set of steps will create the
top side of cube.
1. Choose “Paste” from the Edit menu.
2. Click down on the ascent line.
3. Double-click on the Perspective tool.
4. Set the XZ angle to 0 and the YZ angle to -90.
5. Press “Return.”
If you have been following our example from the
beginning, then your character in the Outline Window
should look something like this:
To do a 3-D Move:
Let’s continue where we left off, creating a disjointed cube.
For this example to work, the square/circle you are
transforming should still be copied into the clipboard.
You will now create the back side of the cube by moving
the selected points backward (by 800 em units) into the 3rd
dimension.
1. Choose “Paste” from the Edit menu.
2. Option double-click on the selection tool to bring up
the Transform dialog.
Fontographer User's Manual
2: Creating New Fonts Page #16