User Guide

Retract BCPs
This item will retract the extended BCP lines of selected
points.
Split Points
Split Points will divide a selected point into two points. The
path can be opened by dragging one point from on top of
the other.
Auto Curvature
This item automatically adjusts the slope of the BCPs of a
selected point to maintain a regular curve as the point is
moved.
Curve Point
This item will be checked if the selected point is a curve
point. Selecting this item while other kinds of points are
selected will change those points to curve points.
Corner Point
This item will be checked if the selected point is a corner
point. Selecting this item while points of other kinds are
selected will change those points to corner points.
Tangent Point
This item will be checked if the selected point is a tangent
point. Selecting this item while points of other kinds are
selected will change those points to tangent points.
Set Basepoint
If you have not selected any points, choosing this item will
cause a dialog box to appear which will allow you to set the
Fontographer User's Manual
11: Reference Section Page #32