User Guide

That’s it! Run Fontographer and you’ll now hear the
sounds. Have fun!!!
If you find the noises emanating from your Mac just too
annoying, then remove the file “Fontographer Sounds” from
the folder where you keep your Fontographer application.
Customizing Fontographer sounds on your PC
If your PC has a sound card, you too can enjoy the sounds
described under Customizing Fontographer Sounds on
Your Macintosh, with a few important differences:
The sounds that Fontographer uses are stored in WAV files
in the main Fontographer directory on your CD ROM.
BUSY.WAV plays when the progress dialog is open.
SNAPP.WAV plays when snapping to points in the
outline window.
SNAPG.WAV plays when snapping to guides in the
outline window.
SILENCE.WAV checks at startup to look for a sound card.
To turn sounds on or off:
1. Select Preferences from the File menu.
2. Choose Sounds from the pop-up menu in the
Preferences dialog.
Check or uncheck the appropriate checkbox to enable or
disable particular sounds, or use the master switch to turn
all sounds on or off at once.
You can personalize the sounds that Fontographer plays by
replacing the three sound files with your own WAV files.
Fontographer User's Manual
10: Expert Advice Page #35