User Guide

5. To remove the font files from the hard disk, open
your “directory” and delete the “.PFB” file for the
font, then open the “” directory and delete the
corresponding “.PFM file.”
One step remains if you wish to remove any trace of the
font from your system; editing the “WIN.INI file”:
1. Use NotePad or the System Configuration Editor to
open the “WIN.INI” file.
2. Find the section header “PostScript, LPT1” or
whichever port you had selected when you installed
the font.
3. Identify your font by its DOS file name and remove
that entire line from the table.
4. Find the line near the beginning of the table which
reads “Softfonts=nn.” Adjust the number to reflect
the number of fonts you have removed.
[PostScript,LPT1]
ATM=placeholder
Softfonts=21
TrueType
1. Open the Control Panel.
2. Open the Fonts Control panel by double-clicking on
its icon..
3. Select the font you want removed.
4. Click “Remove.”
5. If you want the font permanently removed from
your disk, click on the “Delete Font File From Disk”
checkbox.
6. Press “Enter” or click “Yes” to remove the font.
Removing fonts from the NEXTSTEP operating
system
1. In the Browser, go to your fonts folder. It can be
found either in “~/LocalLibrary/Fonts”
Fontographer User's Manual
9: Installing and Removing Fonts Page #19