User Guide

font into one file.
5. Copy each FOND resource from PetesFont-Bold.
fam, PetesFont-Italic.fam, and PetesFont-Bold-Italic.
bmap into the file called PetesFont.fam.
This is easy to do in ResEdit; just launch ResEdit, open up
these four files, and copy and paste the FONDs from the
three other suitcases into PetesFont.fam.
To use ResEdit:
1. Open ResEdit 2.0 or a later version.
2. Open the three font families you just created plus
the bolditalic bitmap file.
3. Using the PetesFont.fam file as your repository,
copy each FOND in the other fonts into it.
When you have done that, there should be a total of four
FONDs in “PetesFont.fam.” This can easily be checked in
ResEdit by double-clicking on the little FOND icon in the
window for the “PetesFont.fam file.” Note that you don’t
need to copy any of the NFNT resources; the construction
of the main font family in Style Merger copied in all the
NFNT’s for you. All you need are the four FONDs brought
together into the main family.
4. Close ResEdit, save your changes, and install the
file “PetesFont.fam.” Now you have an ATR-
compatible font family!
Fontographer User's Manual
8: Creating a Font Family Page #9