User Guide

232 ActionScript language elements
GetNetworkConnectStatus fscommand2 Command
GetNetworkConnectStatus
Returns a value that indicates the current network connection status.
Availability: ActionScript 1.0; Flash Lite 1.1
Example
The following example assigns the network connection status to the connectstatus variable,
and then uses a
switch statement to update a text field with the status of the connection:
connectstatus = FSCommand2("GetNetworkConnectStatus");
switch (connectstatus) {
connectstatus = FSCommand2("GetNetworkConnectStatus");
switch (connectstatus) {
connectstatus = FSCommand2("GetNetworkConnectStatus");
switch (connectstatus) {
case -1 :
_root.myText += "connectstatus not supported" + "\n";
break;
case 0 :
_root.myText += "connectstatus shows active connection" + "\n";
break;
case 1 :
_root.myText += "connectstatus shows attempting connection" + "\n";
break;
case 2 :
_root.myText += "connectstatus shows no connection" + "\n";
break;
case 3 :
_root.myText += "connectstatus shows suspended connection" + "\n";
break;
case 4 :
_root.myText += "connectstatus shows indeterminable state" + "\n";
break;
}
Command Parameters Value Returned
GetNetworkConnectStatus None -1: Not supported. 0: There is currently
an active network connection.
1: The
device is attempting to connect to the
network.
2: There is currently no active
network connection.
3: The network
connection is suspended.
4: The network
connection cannot be determined.