User Guide

Platform integration commands 43
1: There is a pending request, and a network connection is being established.
2: There is a pending request, but a network connection has not yet been established.
3: There is a pending request, a network connection has been established, and the server’s host
name is being resolved.
4: The request failed because of a network error.
5: The request failed because of a failure in connecting to the server.
6: The server returned an HTTP error (for example, 404).
7: The request failed because of a failure in accessing the DNS server or in resolving the server
name.
8: The request has been successfully fulfilled.
9: The request failed because of a timeout.
10: The request has not yet been made.
GetNetworkStatus()
The
GetNetworkStatus() function returns a value indicating the network status of the phone
(that is, whether there is a network registered and whether the phone is currently roaming).
This function is executed immediately upon invocation. If The
GetNetworkStatus() is not
supported, a value of
-1 is returned.
Syntax
status = FSCommand2( "GetNetworkStatus” )
Return value
A value of -1 if the function is not supported; otherwise, one of the following values:
0: No network registered.
1: On home network.
2: On extended home network.
3: Roaming (away from home network).
GetSignalLevel()
The
GetSignalLevel() function returns the current signal strength. It is a numeric value, in the
range of
0 to the maximum value returned by GetMaxSignalLevel().
This function is executed immediately upon invocation. If
GetSignalLevel() is not supported,
a value of
-1 is returned.
Syntax
status = FSCommand2( "GetSignalLevel” )