User Guide

492 Objects
Parameters
layerToMove A zero-based index that specifies which layer to move.
layerToPutItBy A zero-based index that specifies which layer you want to move the layer
next to. For example, if you specify 1 for
layerToMove and 0 for layerToPutItBy, the
second layer is placed next to the first layer.
bAddBefore Specifies whether to move the layer before or after layerToPutItBy. If you
specify
false, the layer is moved after layerToPutItBy. The default value is true. This
parameter is optional.
Returns
Nothing.
Description
Method; moves the first specified layer before or after the second specified layer.
Example
The following example moves the layer at index 2 to the top (on top of the layer at index 0):
fl.getDocumentDOM().getTimeline().reorderLayer(2, 0);
The following example places the layer at index 3 after the layer at index 5:
fl.getDocumentDOM().getTimeline().reorderLayer(3, 5, false);
timeline.reverseFrames()
Availability
Flash MX 2004.
Usage
timeline.reverseFrames([startFrameIndex [, endFrameIndex]])
Parameters
startFrameIndex A zero-based index that specifies the first frame at which to start
reversing frames. If you omit
startFrameIndex, the method uses the current selection. This
parameter is optional.
endFrameIndex A zero-based index that specifies the first frame at which to stop reversing
frames; the range of frames goes up to, but does not include,
endFrameIndex. If you specify
only
startFrameIndex, endFrameIndex defaults to the value of startFrameIndex. This
parameter is optional.