User Guide

88 Testing Flash Lite Content (Flash Professional Only)
For more information about selecting your test devices, see “Selecting test devices and Flash
Lite content type (Flash Professional only)” on page 94.
Setting emulator debug options (Flash Professional
only)
The Flash Lite emulator can send debugging messages to the Output panel while content is
running. The emulator reports the following types of information to the Output panel:
Trace messages that are generated by a trace() function call within your Flash Lite
application. For more information, see
trace function in the Flash Lite 2.x ActionScript
Language Reference.
Information messages that contain general information about the selected test device, SWF
file size, and other information. For a list of information messages, see the Appendix A,
“Warning and Error Messages (Flash Professional Only),” on page 107.
When the Information debug option is selected, the emulator also outputs the platform
capabilities for the selected device and content type. This information is useful for
determining what features are available to your application on the target platform. For more
information, see “Flash Lite platform capabilities (Flash Professional only)” on page 101.
Warning messages that contain information about problems with your Flash Lite content
that might affect playback. For a list of possible warning messages, see the Appendix A,
“Warning and Error Messages (Flash Professional Only),” on page 107.
The settings pane in the Flash Lite test window contains controls that let you filter the type of
information that the emulator generates.
To set Flash Lite output options:
1. Select Control > Test Movie.
2. In the settings pane in the Flash Lite test window, do the following:
■ Select or deselect the Trace option.
■ Select or deselect the Information option.
■ Select or deselect the Warnings option.