User Guide

202 Chapter 8: Using Live Filters
You can rename or delete a custom Live Filter as you would any other style in the Styles panel.
For more information, see “Creating and deleting styles” on page 237 and “Editing styles”
on page 238.
Saving Live Filters as commands
You can save and reuse a filter by creating a command based on it. Using the History panel,
you can automate all the Live Filters applied to an object by creating a command available
from the Commands menu. You can use these commands in batch processing. For more
information, see “Performing commands with a batch process” on page 434.s
To save filter settings as a command:
1. Apply the filters to the object.
2. If the History panel is not visible, select Window > History.
3. Shift-click the range of actions you want to save as a command.
4. Do one of the following:
■ Select Save as Command from the History panel Options menu.
■ Click the Save button at the bottom of the History panel.
5. Enter a command name and click OK to add the command to the Commands menu.
NOTE
You cannot rename or delete a standard Fireworks filter.
Save button