User Guide

120 Chapter 9 Debugging Application Code
b In the Remote Host box, enter the RDS server description, host name, and
port.
(Optional) Select the Use Secure Sockets Layer (SSL) option.
c In the ColdFusion RDS Security box: if ColdFusion RDS Security is
implemented on your system, enter a username and password to access the
server. If you do not have this information, ask your network administrator.
(Optional) Select the Prompt for Password option.
dClick OK.
The Remote Development Settings dialog box displays the description and
start page URL of the RDS server.
5 (Optional) Select the option called Don’t prompt for these settings at next debug
session.
6 Click the Mappings tab.
7 Complete the fields as follows:
• RDS Server Select a RDS server against which to run the debugging session.
• Studio Path Enter or browse to the path that ColdFusionStudio uses to locate
the page you are debugging.
• CF Server
If you debug against a local server, enter the same path as for
ColdFusionStudio.
If you debug against a remote server, enter its full path. The path must be the
same as the alias or virtual mapping that your Web server uses.
• Browser Path Enter the browser path, or URL, of the application.
Click Add.