User Guide

ClusterCATS Dynamic IP Addressing (Windows only) 339
6 Open the Advanced IP Addressing dialog box by right-clicking Network
Neighborhood and select Properties. On the Protocols tab, select TCP/IP Protocol
and click Properties and then click Advanced.
7 Unbind the IP addresses from the Web server’s NIC by selecting each IP address
in the IP Addresses region and clicking Remove. This removes the IP addresses
corresponding to the Web Site.
8 Click OK three times.
9 Simultaneously reboot all the systems in the cluster. Note that you do not want to
eboot them one at a time or they will failover.
ClusterCATS assigns the IP addresses dynamically to your Web servers.