User Guide

316 Chapter 13 Maintaining Cluster Members
7 Select the Stopped option to stop the ClusterCATS service and enter a value, in
minutes, in the Drain Down Period field. This allows current users to conclude
their sessions within the time indicated.
8Click OK.
When the drain-down period expires, the server will fail over to another server in
the cluster.
To take a cluster member out of Maintenance mode:
1 Physically go to the server and open the ClusterCATS Server Administrator utility
on by selecting Start > Programs > ColdFusion 3.0 >
ClusterCATS Server Administrator.
The ClusterCATS Server Administrator appears.
2 Click the BT Service Status button to display the Manage ClusterCATS Services
dialog box.
3 Select the Running option.
4Click OK.
5 Open the ClusterCATS Explorer and select the cluster member that you want to
take out of Maintenance mode.
6Select Configure > Load. Alternatively, you can right-click the cluster member
and select Configure > Load.
The Properties dialog box appears for the selected cluster member with the Load
tab active.
7 Change the Peak load threshold from 0 percent to an appropriate value.
8Click OK.