User Guide

Session-Aware Load Balancing 285
6 Click Register to create the probe.
7 Close all open dialog boxes.
An icon for the new probe appears under the Monitor Manager in the
ClusterCATS Explorer.
Removing ColdFusion probes
To remove a ColdFusion probe:
1 Open the ClusterCATS Explorer.
2 Select the cluster_name> Monitor Manager > monitor_name > probe_name in
the left pane.
3Select Probe > Delete. Alternatively, you can right-click the probe and select
Delete.
Configuring ColdFusion probes in UNIX
This section describes the following:
• “Adding ColdFusion probes” on page 285
• “Editing and removing ColdFusion probes” on page 288
Adding ColdFusion probes
To add a new ColdFusion probe:
1 Open the ClusterCATS Web Explorer if it is not already open.
2 Click the Show Cluster link. The Show Cluster page appears.
3 In the Web Server Name field, enter the fully qualified host name of the server for
which you want to configure the ColdFusion probe.
4 Click OK. The Cluster Member List page appears.
5 Click the Server Attributes link. The Connect To Server page appears.
6 Select the server you want to add a probe to from the Web Server Name listbox.
7 Click OK. The selected server’s Properties page appears.