User Guide

Server Load Thresholds 271
To configure load threshold settings using the Server Load dialog box:
1 Open the ClusterCATS Explorer and select a server.
2Select Monitor > Load. Alternatively, you can right-click the server and select
Monitor > Load.
The Server Load dialog box appears:
3 Use your mouse to drag the Peak load threshold (red) up or down.
As you move the line, the Peak load threshold percentage changes.
4 Enable gradual redirection by selecting the Gradual Redirection check box.
5 Drag the Gradual Redirection load threshold (yellow) to adjust it accordingly.
6 Close the dialog box to apply the load threshold settings you configured.