User Guide

Adding Cluster Members 265
Enabling maintenance support for clusters requires that you configure your
cluster for ClusterCATS dynamic IP addressing. For more information, see
“ClusterCATS Dynamic IP Addressing (Windows only)” on page 334 .
5 Enter the fully qualified host name of the maintenance address (for example,
serv1.yourcompany.com) in the Maintenance Address field.
6Click OK.
7 Repeat steps 2 through 6 to add additional servers to the cluster manually.
Adding cluster members in UNIX
Use the ClusterCATS Web Explorer to add cluster members.
To add a cluster member to a cluster:
1 Open the ClusterCATS Web Explorer if it is not already open.
2 Click the Add Server link.
The Add Server page appears:
3 Enter the fully qualified host name (for example,
doc.allaire.com) in the
Web Server Name field.
4 Click OK to add the cluster member to the existing cluster.