User Guide

Creating Clusters 255
If you are not configuring this Web server for offline maintenance support, go to
step 8.
Note
You can only set the maintenance support option when creating a cluster or
adding a cluster member to a cluster. You cannot configure or modify this option
after you have created and added the cluster member to the cluster.
Enabling maintenance support for clusters requires that you configure your
cluster for ClusterCATS dynamic IP addressing. For more information, see
“ClusterCATS Dynamic IP Addressing (Windows only)” on page 334.
7 Enter the fully qualified host name of the maintenance address (for example,
serv1.yourcompany.com) in the Maintenance Address field.
8Click OK.
9 Repeat steps 4 through 8 for each Web server you want to add to the cluster and
then click Next to proceed.
The Load Management dialog box appears: