User Guide

216 Administering ColdFusion Server
To configure an alarm notification
1. Open the ClusterCATS Explorer and select the cluster to which you want to add an
alarm.
2. Choose Alarm Notification from the Configure menu. Alternatively, you can right-
click the cluster and select Configure > Alarm Notification.
The Alarm Notification dialog box appears.
3. Select the event for which you want to trigger an alarm and enter the e-mail
address of the person you want to receive e-mail notification of the event.
4. Repeat step 3 for each event you want to be notified about.
Click Propagate to send all notifications to the same e-mail address.
5. Enter the name of the default SMTP mail server to which your mail is delivered in
the Default SMTP Host field.
6. Click OK.
If an event you chose occurs, ClusterCATS sends an e-mail message to the
designated person. The following table explains the notification schedule for each
event.
Alarm Event Notification Schedule
Event type Notification occurs...
Disk Failure Immediately
HTTP Server Failure Immediately
Server Busy Warning Every 24 hours