Operation Manual
- 10 -
Basic Operations
EQ menu
The Audio Control feature allows you to easily adjust your audio system to meet the acoustical
characteristics of your vehicle, which vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the cabin equalizer.
Notes:
1. The parameters of the EQ modes has been preset and you can not change them besides ‘User’.
2. The EQ mode will change to ‘User’ automatically when you adjust the frequency value under the
modes besides ‘User’.
3. The value of Sub is independent of EQ mode and can be adjusted separately.
Select preset equalizer
1. Enter the EQ setup mode
Touch the [
] icon in the user interface and the EQ setup interface will display on the screen.
2. Select EQ mode
[User] [Rock] [Flat] [Class] [Pop] [Jazz] [Techno] [Optimal]
Adjust Fader/Balance
You can adjust front/back/left/right balance of the speaker and the subwoofer volume to get
balanced listening effect according to the surroundings and your interest.
Adjust EQ parameters
To adjust EQ parameters, touch and drag the parameters
adjustment bar.
Touch [
] / [ ] or drag [ ] to adjust the
parameters.
• [ User ]: Set the desired audio effect.
• [BAS] bass range: -7 to +7
• [MID] middle range: -7 to +7
• [TRE] treble range: -7 to +7
• [LPH] low pass filter range: 60, 80, 100, 200
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ
setup interface will display on the screen.
2. Adjust subwoofer volume
Touch [
] / [ ] or drag [ ] to adjust subwoofer
volume from 0 to38.
3. Adjust fader / balance value
Touch [
] / [ ] / [ ] / [ ] to adjust fader /
balance value
[ ]: Front speaker, fader range: 0 to 7.
[ ]: Rear speaker, fader range: 0 to 7.
[ ]: Left speaker, balance range: 0 to 7.
[ ]: Right speaker, balance range: 0 to 7.
• [MPF] middle pass filter range: 0.5K, 1K, 1.5K, 2.5K
• [HPF] high pass filter rang: 10K, 12.5K, 15K, 17.5K
• [ LOUD: On/Off ]: When listening to music at low volumes, this featurewill selectively boost
certain bass and treble frequencies.
• [ RESET ]: Cancel the equalizer function settings.
DOP User manual_ENG.indd 10 14/11/2013 12:05:08