Operation Manual

36
Balance-Fader
– Press the soft key , to adjust the balance, the cursor moves.
– Press the soft key
, to adjust the fader, the cursor moves.
– Press
to go back the tone setup main menu.
Img50 – “Balance – Fader” setting
Volume Settings
– Startup volume:
Default value of system startup. If actual volume is larger than startup volume in
the last time, then system will use the default value as the volume setting after
reboot. If actual volume is smaller that startup volume in the last time, then the
startup volume has no effect.
– Navigation volume: Volume of navigation.
– TA volume: Volume of traffic announcement.
Short press the soft key
to enlarge the “Startup volume”, “Navigation volume”
or “TA Volume”, the cursor moves to the right.
Short press the soft key
to reduce the “Startup volume”, “Navigation volume”
or “TA Volume”, the cursor moves to the left.
Press to go back the tone setup main menu.