CAUTION Texts with this symbol draw your attention to potential sources of damage to your vehicle. CAUTION Short Press: press no more than 2 seconds Long Press: press more than 2 seconds Hard Key: buttons on the front panel Soft Key: buttons on the touch screen. QUICK GUIDE Product Overview This overview will help you to quickly know more about the control elements. Img1 - Overview of the control elements 1.
“0” , the unit volume is muted ( display ). 2. Function Buttons: Short press the function button to get into the different function: − RADIO : Switch back to radio mode or changes the waveband (FM/ MW / LW) during radio mode. − MEDIA : Changes to media source played or selects media source ( USB、 SD). − PHONE : Open the telephone function and mutes the other audio source. − TONE: Open the tone and volume setting menu . − NAV : Switch to navigation system. − AUX: Switch to AUX 1 - AUX 2 - AUX 3 mode.
CAUTION − − − Inserting a second CD/DVD while an inserted CD/DVD is being ejected can destroy the CD/DVD drive in the unit. Note that it takes a few seconds to eject the CD/DVD after pressing the Eject button . The protective barrier in front of the CD/DVD slot is opened while this is happening. You must wait until the CD/DVD is ejected before trying to insert a new CD/DVD. To avoid damage, do not press the knobs and buttons forcefully. Light pressure is sufficient to operate the unit.
RADIO Press “RADIO” button to get into the radio mode. You can search you wanted station by manually or automatically seeking. You can store the station, and then you can quick switch to the station by shortcut button. Img3 – Radio main menu All radio stations with strong reception are automatically stored in the station list. The station list is updated automatically on a regular basis. Selecting radio stations Opening RADIO main menu Press the RADIO function selection button to open the RADIO main menu.
Img4 – Radio main menu – Band switch Changing radio stations Short pressing the arrow keys or on the panel. Or pressing the arrow keys on the steering wheel . Or touching the arrow keys or on the screen of the “RADIO” main menu takes you to the previous or next station. Setting radio stations manually Turning the knob to set a radio station manually via its frequency. Each turn of knob in FM band, the frequency changes 0.1 Mhz. Each turn of knob in MW band, the frequency changes 9 Khz.
Img5 – Update station list Storing radio stations Radio stations can be stored directly on the displayed “station buttons”or in the memory list. Storing radio stations on a displayed station button Press and hold one of the six station buttons 1 to 6 displayed in the “RADIO” main menu until you hear a beep. The station currently playing is now stored on that station button. Ex: Store 89.4MHz in the button “2” (“Img6 – Storing a station”).
Img7 – Memory list Storing radio stations into memory list to get into the memory list. Press the button to store a new station into the memory list. Enter the button And press the button to delete a stored station. EXTRA Function In the FM band, you can use the RDS functions.
this pop up window. Scan all receivable radio stations Img9 – Radio main menu – scan − Touch the settings knob at the bottom right of screen pops up with two items. . A new window − Touch soft key , the icon changes from to . All radio stations with strong reception are scanned for about 10 seconds each in the sequence in which they appear in the station list. − While the scan function is running, the icon at the bottom right of screen is .
Open the radio text window NOTICE This function is only available in FM band. Img10 – Radio main menu – scan − Touch the settings knob at the bottom right of screen pops up with three items. , the icon changes − Touch soft key appears in the middle of the screen. Alternative frequency (AF) NOTICE 9 .
This function is only available in FM band. Transmitters broadcast the same station in different countries, areas with different frequency. To ensure users always can listen to the best quality radio programme. If the quality of current frequency goes bad, radio will automatically switch to a new frequency in the same station which has better reception. Traffic programme (TP) function NOTICE This function is only available in FM band.
Incoming traffic announcement If there is a traffic announcement come be received, a new window will pop up with traffic information. Img13– Traffic announcement If you wish to interrupt the announcement, touch in the traffic announcement popup window. The TP function remains in standby and the next traffic announcement will be made in the current audio mode. The unit will be switched to predefined settings for volume, balance and fader for the duration of the announcement.
MEDIA Overview of the MEDIA main menu Press “MEDIA” button to enter into the multimedia system. In the media function, you can select the USB player mode, SD card player mode. You can switch back to the media mode from navigation mode or DVD mode at anytime. Img14 – MEDIA main menu CAUTION - Ejecting the USB or SD device playing ,the system might be anomaly.
USB Mode to enter the USB selection − Press the soft key menu. − In the USB selection menu, you can choose “Music”、”Picture”、”Text” to play by 、 touching the soft key 、 . Plug / Unplug USB − Using the attach switch cable for USB connection. − Ejecting the USB during using, the source mode will be switched to radio mode automatically. Img15 – MEDIA main menu – USB USB Music Mode Press the soft key enter the music play window.
Img16 – MEDIA main menu – USB Music Mode Track selecting at the left bottom of screen to enter the folder − Press the soft key selection menu. − You can find all the music track and folders in the list. You can select the track and folder by touching the name on screen. − The music track that is currently playing is highlighted. − To view all of the tracks, move the slider at the right of the screen down.
Repeat / Random / Scan at − Touching the soft key buttons the bottom of screen to open and close the “Repeat”, “Random”, “Scan” function. After the function is opened, the status word will be display at the right top of the screen. − Repeat: Select to repeat play current track or play current folder.The repeat status “Track repeat” and “Folder repeat” will be displayed at the right top of screen. − Random: Select “Folder random” to play songs randomly in current folder.
CAUTION If the picture bigger than 2M,the system can’t view. Some warning :”Can not view image bigger than 2M”. Img19 – MEDIA main menu – USB Picture Viewer warning USB Text Read Mode Press the soft key You can read the text file. enter the text read window. SD Card Mode Plug / Unplug SD card − Insert the SD card in face side. − Press the exposed part of the SD card lightly, then the SD card will be ejected.
Playing control − Pause: press the soft key to pause or play again the music. − Track select: Short press the soft key track. or − Fast playback: Long press the soft key backward. or to select the previous or next to fast forward or fast Track selecting – Press the soft key at the left bottom of screen to enter the track selection menu. – You can find all the tracks and folders in the list. You can select the track and folder by touching the name on screen.
SD card might have a complicated folder structures, the control function is a little different with USB mode. SD Card Video Mode Img22 – MEDIA main menu – SD card video mode Playing control – Pause: Press the soft key to pause or play again the video. or – Fast playback : Touch the soft key backward. or – Video select : Touch the soft key video. to fast forward or fast to select the previous or next – Touch the soft key to go back the video folder. – Touch the soft key to change display settings.
Audio Input Aux 1 - 2- 3 Connect an external audio source (MP3 or MP4 player, etc) to the head unit. Inputs available: − AUX 1 audio input, jack on the front of unit. − AUX 2 audio input, original jack on the vehicle (if equipped). − AUX 3 audio-video input, RCA jacks on the back of unit. to enter into Aux in mode. The head unit can not control the Press soft key play back except volume adjustment.
– – the CD/DVD after pressing the Eject button. You must wait until the CD/DVD is ejected before trying to insert a new CD/DVD. If the CD/DVD drive has a mechanical fault or if a CD/DVD has been incorrectly or not fully loaded, the message “CD error. Please check CD.” and then “DVD drive error” appears on the screen. Check the CD/DVD and then insert it properly in the drive. You will be unable to insert any more CDs or DVDs if the temperature inside the unit is too high.
point where it is automatically pulled in. – The DVD starts automatically. It can take a few seconds for the DVD to be read; the screen stays dark while this is happening, so please be patient. The “Intro” stored on the video DVD (a short introductory sequence) is played. Wait until the Intro has finished and the film's menu options appear with the unit's own menu prompts. – Depending on the inserted video DVD, you may have to open the unit's menu control system manually.
– Once you have highlighted the required option, select the Enter function key to activate it. – Make all the desired settings available in the film's menu. – Start the film by selecting the required option from the film's menu selection. – The film starts and the unit switches to full-screen view. Full-screen view – In full-screen view, all buttons are hidden. Touch the screen to see the video DVD menu again.
Function keys used to control the current audio or video source – Pause: Press the soft key to pause or play again the video. or – Fast playback : Touch the soft key backward. or – Video select : Touch the soft key video. to fast forward or fast to select the previous or next NOTICE The buttons key and and on the front panel have the same function with soft .
Opening chapter selection Img30 –Disc– DVD Chapter selection – In the video DVD menu, touch the function key while a film is running to view a list of chapters on the video DVD. The current chapter is at the top, with all the following chapters underneath. – Touch the display of a chapter directly (e.g. Chapter 1). Film playback continues from the beginning of the selected chapter. – Select to return to the film without selecting another chapter.
Inserting a CD/MP3 disc – Insert a disc in to the disc slot, the screen displays “Reading disc...”. If the disc is loaded successfully, the system will change to CD/MP3 menu and play the disc at the same time. Ejecting a CD disc – Press button to eject the disc and the screen displays “Ejecting disc...”. If the CD/MP3 is not removed from the tray within 10 seconds, it is retracted again to prevent damage. Playing control – Pause : press the soft key to pause or play again the music.
Repeat / Random / Scan – Touching the soft key buttons at the bottom of screen to open and close the “Repeat”, “Random”, “Scan” function. After the function is opened, the status word will be display at the right top of the screen. – Repeat: repeat playback current track. – Random: Random playback current CD/MP3 disc. – Scan: Scan the whole CD/MP3 disc and play each track 10 seconds. NOTICE ID3 tag：ID3 is a metadata container most often used in conjunction with the MP3 audio file format.
– Fast playback: Long press the soft key backward. or to fast forward or fast Track selecting at the left bottom of screen to enter the track – Press the soft key selection menu. – You can find all the tracks and folders in the list. You can select the track and folder by touching the name on screen. – The track that is currently playing is highlighted. – To view all of the tracks, move the slider at the right of the screen down.
Data disc Video Mode Img35 – Disc – Data disc video mode Playing control – Pause: Press the soft key to pause or play again the video. or – -Fast playback : Touch the soft key backward. or – Video select : Touch the soft key video. to fast forward or fast to select the previous or next – Touch the soft key to go back the video folder . – Touch the soft key to change display settings..
BLUETOOTH Handsfree Warning Your attention must always be concentrated on road traffic as an absolute priority! The telephone should only be used if the road traffic situation allows. Accidents and injuries can occur if the driver is distracted. − Please only use the telephone when the road, weather and traffic conditions are such that it is safe to do so. − The different volume settings should be selected so that warning signals from outside the vehicle, e.g.
Img38– Bluetooth setting In the “BT setting” menu, all bounded mobile phone names are displayed in the list. You can press the button to remove the bounded mobile phone name from the list. Pressing the button button change to to bound a new mobile phone, and the until the connecting finished. Img39 – Bluetooth setting – Matching a new mobile phone. Turn on the bluetooth of mobile to match a new device. A new device named “Blackberry 8320” was found.
Img40 – Bluetooth setting – Phone list The Contact List download remind will jump out during the connection. Touch the botton to download the Contact List. Img41 – Bluetooth setting – Contact list download CAUTION Few brand of mobiles don’t support this function because of the compatibility. After the mobile phone established the connection with Built-In Bluetooth, an icon Press with be display at the start of list item. to return to phone main menu.
Make a phone call You can dial a number via touching the keyboard and press the green button to call the number. System will record the dialed number in the memory. Img42 – Dial a call During a telephone call − If you touch the function key during a telephone call, the current call is switched to “mute”. This means that the call continues to be held while the sound is muted. − When you touch the function key , the call can be continued.
CAUTION Few brand of mobiles will disconnected the bluetooth after pressing because of the compatibility. − If you touch function key during a call, The voice will only be outputted from the ear phone and the voice will never be heard by others. − Press the function key to resume the handsfree phone call. Img44 – Privacy mode in a call − Touch soft key to end the call.
Img45 – Incoming a call Img46 – Receive a call During the call, you can turn the left knob to adjust the telephone volume.
TONE You can adjust the sound character and the volume of different audio sources to suit your individual needs. Img48 – Tone setup main menu Treble - Bass Press the soft key to get into the “Treble-Bass” setting. − Short press the soft key to the right. to enlarge the “Treble” or “Bass”, the cursor moves − Short press the soft key to the left. to reduce the “Treble” or “Bass”, the cursor moves − Press to go back the tone setup main menu.
Balance-Fader – Press the soft key , to adjust the balance, the cursor moves. – Press the soft key , to adjust the fader, the cursor moves. – Press to go back the tone setup main menu. Img50 – “Balance – Fader” setting Volume Settings – Startup volume: Default value of system startup. If actual volume is larger than startup volume in the last time, then system will use the default value as the volume setting after reboot.
Img51 – Volume settings Volume Settings Press the soft key to get into the “GALA” setting. – Short press the soft key right. to enlarge the “GALA”, the cursor moves to the – Short press the soft key to reduce the “GALA”, the cursor moves to the left. – Press to go back the tone setup main menu. Img52 – GALA settings Acoustic feedback Select the “On” or “Off” button to open and close the acoustic feedback. – Select “On”, the acoustic feedback is opened and the sound can be output via loudspeaker.
SETUP Press “SETUP” button to enter the setup main menu after system started up. You can set the system settings in the menu. Img53 – Setup main menu Radio Setup Press soft key to enter into radio setup main menu.
Select preset band There are 30 presets reserved for FM, MW and LW bands. You can select different section of presets to store the radio station from the pull-down menu. RDS Regional Mode and select an item in the pull-down menu to Press the soft key change the RDS regional mode setting. – Select “Automatic” to switch station automatically. – Select “On” to activate the RDS regional mode. – Select “Off” to deactivate the RDS regional .
Display setup Press soft key to enter into display setup main menu. Img56– Display setup main menu Set brightness – Short press the soft key right. to enlarge the “Brightness”, the cursor moves to the – Short press the soft key left. to reduce the “Brightness”, the cursor moves to the – Press to go back the tone setup main menu.
System Setup Press soft key to enter into system setup main menu. Img57 – System setup main menu System language Touch Such as English, Italian. to choose the language from the pull-down menu. Factory settings to enter into the factory setting main menu. In this Press soft key menu, you can clear all the user’s personal settings.
– In the Factory settings menu, activate the checkboxes in front of the entries by touching the appropriate function key. Touch the function key again to deactivate the checkbox. – In this way, you can select settings you would like to reset. – Touch the function key and confirm the following security check to reset the selected settings to factory settings and delete the data stored there. System information Press soft key to enter into the system information.
Configuration Press soft key to enter into the configuration menu. Configuration menu include Reverse assistant、Assistant type and Car type for customer select.
Connections diagram 44
The BLUETOOTH ® world mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by ALDINET S.p.A. is under license. The MACROM brand is a registered trade mark of MACROM SA and any use of such marks by ALDINET S.p.A. is under license.
