Operation Manual

3A
Rear of product
REAR VIDEO OUT FRONT VIDEO OUT MONITOR VIDEO IN EXTERIOR VIDEO IN AUDIO OUT (LEFT) AUDIO OUT (RIGHT) AUDIO IN (LEFT) AUDIO IN (RIGHT)
To monitor with rear-viem camera input
RCA input for rear-view camera
To headrest or ceiling mount monitors
RCA input for video games
AUDIO output (RCA)
AUDIO input (RCA)
GREEN - PARKING BRAKE RED - +12V ACC
YELLOW - +12V BATT
BLUE - STANDBY OUT BROWN - REVERSE INPUT BLACK - POWER GROUND
USB jack(optional)
remote control sensor jack
BLACK: (-) neg . ground input. To vehicle chassis
BROWN: (+) pos. reverse wire input (for rear view camera option)
BLUE: (+) 300mA max. standby output
YELLOW: (+) pos. 12 volt constant input
RED: (+) pos. 12 volt accessory input
GREEN: Used to detect the On/Off status of the parking brake ,This lead must be connected
to the power supply side of the parking brake switch.
YELLOW
Left(WHITE)
Right(RED)
16
Note
1.We advise to connect the EX-VIDEO-CON lead.
And so the front display only will be on while detecting the
parking brake ON.
Or if the
EX-VIDEO-CON and MONITOR VIDEO IN are used,
the front display will be on while backing the car.
2. This product’s REAR VIDEO OUT is for connections of displays
to enable passengers in the rear seats to watch the DVD
or Video CD.
Warning
NEVER install the display in a location that enables the driver
to watch the DVD or Video CD while driving.
This products whether your car’s parking brake is engaged or not,
and prevents you from watching a DVD or Video CD on the display
connected to FRONT VIDEO OUT while driving.
Example: When you attempt to watch a DVD, the screen is black.
When you parking your car in a safe place and apply the parking
brake, the picture appears on the screen.