Operation Manual

GB-26
Repeat playing
When playing MP3 files, press the RPT button
repeatedly on the remote control to select repeat mode:
REPEAT ONE, OFF. While in REPEAT ONE mode, it
will play one track repeatedly. The defaulted mode is
REPEAT ALL mode, the unit will play all tracks
repeatedly.
The number buttons
Selecting any track directly by using Number
button(0-9).For example, if you want to play the 23rd
track, just press button 2 and then press button 3 and
the corresponding track will be played.
Note:
* This function can be operated using the remote control
or touch top right corner of screen to be functioned.
* If you make a mistake, press CLEAR button to clear.
Stop playing
When playing MP3 files, press ■ button on the remote
control OR on the bottom of the screen to stop playback.
PAUSE PLAYING
When playing MP3 files, press >II on the remote control
or on the bottom of the screen to pause playing and
press again to resume play SKIP FORWARD /
BACKWARD PLAY.
Press >> or << on the remote control or press and hold
>>I or I<< on the panel to performed fast rewind or fast
forward: 2X→4X→8X→16X→32X→
ISO FILE OPERATION
When playing the media with folders, the unit will play
the first track in the first folder automatically.
Press the >>I or I<< on the remote control or
PREV/NEXT buttons on the screen to move the cursor
to current folder then press ENTER button on the
remote control to be back to folder list.
Note: The unit will play the tracks in next folder after
playing the previous folder.
Eject a disc
Press EJ button on the unit or on the remote control to
eject a disc.
INSTALLATION
Notes
Before finally installing the unit, connect the wiring
temporarily, making sure it is all connected up properly,
and the unit and the system work properly.
Use only the parts included with unit to ensure proper
installation. The use of unauthorized parts can cause
malfunctions.
Consult with your nearest dealer if installation requires
the drilling of holes or other modifications of the vehicle.
Install the unit where it does not get in the driver's way
and cannot injure the passenger if there is a sudden
stop.
The semiconductor laser will be damaged if it overheats,
so don't install the unit anywhere hot--for instance, near
a heater outlet.