DSP POWER AMPLIFIER USER MANUAL M-DSPA.500 User manual_ENG_M-DSPA.500.
Contents Warranty........................................................ 3 Safety information......................................... 3 Information on disposal of unit..................... 3 Features ........................................................ 4 Specifications................................................ 4 Product overview........................................... 5 Front panel................................................ 5 Speaker connectro pins layout.................
Warranty Thank you for purchasing this Macrom product. Should your product need warranty service, please return it to the shop where you buy it or to the Macrom distributor in your country. The warranty does not cover damage due to improper use and or installation, incorrect connections to power supply and audio sources, exposure to excessive humidity, unauthorized repair attempts or modifications.
Features 5-channel amplifier with audio processor controlled by App for smartphones and Bluetooth streaming audio.
Product overview Front Panel 2 1 1. Power mode selection switch 5 3 4 Back view 6 BT ANT M-DSPA.500 POWER IN (REMOTE or SIGNAL) FUSE (30A) 2. Bluetooth antenna POWER SIGNAL ON REMOTE ON PROTECT POWER ON BATT GND 3. LED protection indicator 4. Power LED indicator 5. Power connector 7 6. Fuse [30A] 8 7. Subwoofer output 9 10 Front view 8. Front Exit 11 L + - 9. Rear Output R 10 10. Connector for loudspeakers 1 20 SUB W 11.
How to install and connect the APP APP installation 1. Download the APP from Google Play or Apple Store searching for “M-DSPA.500” 2. Install the application in your Android or iPhone mobile phone. 3. Activate Bluetooth on your mobile phone and search for “M-DSPA.500”, then pair it. If necessary, the coupling code is 1234. ], the amplifier will be connected and you 4. Open the “M-DSPA.500” APP and click on [ can set your own sound from the available functions of the APP. 5.
How to install and connect the APP APP Installation 1. Download the APP from Google Play or Apple Store searching for “M-DSPA.500” 2. Install the application in your Android or iPhone mobile phone. 3. Activate Bluetooth on your mobile phone and search for “M-DSPA.500”, then pair it. If necessary, the coupling code is 1234. ], the amplifier will be connected and you 4. Open the “M-DSPA.500” APP and click on [ can set your own sound from the available functions of the APP. 5.
APP overview Main 1. Parametric equalizer; click to get the equalization functions. 2. Crossover; click to get the crossover functions. 3. Save to phone; after finishing the setting, you can create the name of the audio setting and then with the (OK) button the audio setting will be saved in your mobile phone. 4. Connect; click to connect the amplifier from the APP. 5. Preselection of favorites; it is possible to recall the 5 presets saved in the amplifier. 6.
APP overview Equalizer 1. 7-band equalizer adjustable from + 15dB to -15dB. 2. Dynamic Bass setting. 3. Front section selector for parameter copy 4. Front Left, equalizer setting front left section. 5. Rear Left, equalizer setting front left section. 6. Subwoofer, subwoofer section equalizer setting. 7. Variable frequency setting from 20Hz to 20,000Hz. 8. Variable Q Factor from 0.3 to 9.9. 9. Rear section selector for parameter copy 10. Front Right, equalizer setting front right section 11.
APP overview Crossover filter 1. Overview of the graph. 2. Low cross-section frequency setting, adjustable from 20Hz to 20,000Hz. 3. Low-pass slope selector, selectable between, 6-12-18-24dB/oct or Bypass (Off). 4. Crossover selector section FL (front left). 5. Crossover selector section RL (rear left). 6. SUB crossover selector (subwoofer). 7. Setting high-pass frequencies, adjustable from 20Hz to 20,000Hz. 8. High pass slope selector, selectable between, 6-12-18-24dB/oct or Bypass (Off). 9.
APP overview Setting channels 1. FL - Left front gain slider, adjusted from Off to 0dB 2. FR - Right front gain slider, adjusted from Off to 0dB 3. RL - Left rear gain slider, adjusted from Off to 0dB 4. RR - Right rear gain slider, set from Off to 0dB 5. SW - Subwoofer gain slider, set from Off to 0dB 6. FL - Selector of the front left phase, 0 ° / 180 ° 7. FL - Left front Mute selector switch, On / Off. 8. FR - Selector of the front left phase, 0 ° / 180 ° 9.
APP overview Time alignment 1. FL (+) increase front right speaker delay. 2. FL (-) decrease front right speaker delay. 3. RL (+) increase of rear right speaker delay. 4. RL (-) decrease delay speaker rear right. 5. SUB (-) subwoofer delay decrease. 6. Parameter reset 7. FR (+) increase front right speaker delay. 8. FR (-) decrease front right speaker delay. 9. RR (+) increase of rear right speaker delay. 10. RR (-) decrease delay speaker posterior right. 11. SUB (+) subwoofer delay increase.
APP overview Selector gain level 1. Value of the chosen level between Off and 0dB (max). 2. Cursor to change the value of the level. 1 2 Selector frequency cuts 1. Cancel, selection cancel 2. Type the value of the selected cutoff frequency between 20Hz to 20,000Hz. 3. OK, press to confirm the selection. 3 1 2 Slope selector 1.
Connections Plug & Play 1. Plug & Play wiring Interpose the Plug & Play harness between the Car stereo and the connector coming from the car and connect the end to the M-DSPA.500 amplifier. Note: See the wiring list available at www.macrom.it. 2. Power terminal Connect the (+) terminal to the car's fuse. Make sure that the connection point is sized to deliver a maximum current of 30A.
Connections System extension Thanks to the pre-amplified outputs present on the product, it is possible to expand the system by adding a multi-channel amplifier (4 + 1) to enhance the sound system. SUB NON UTILIZZARE SUB W FL FRONT LINE OUTPUT REAR L R 10 11 1 RL + Uscita remota (+12V ) SUBW OUTPUT Ingresso Altoparlanti FR SPEAKER 20 BATT +12V Ground (Telaio) Car Stereo RR Power amplifier Uscita Altoparlanti BATT +12V Ground (Telaio) - 14 User manual_ENG_M-DSPA.500.
Declaration of Conformity M-DSPA.500 DSP POWER AMPLIFIER Hereby, Aldinet S.p.A, declares that this type of M-DSPA.500, Brand Macrom is in compliance with the essential requirements and other relevant provisions of Directive R&TTE 1999/5/EC. The full text of the EU Declaration of conformity is available at the following internet address: www.macrom.it or at Aldinet S.p.A., Viale Colombo, 8 - 20090 Trezzano S/N (MI) Italy Made in China by Aldinet S.p.A.
ALDINET S.p.A Viale C. Colombo, 8 - 20090 Trezzano s/N (MI) - Itlaly Tel. +39 02 484781 w w w User manual_ENG_M-DSPA.500.indd 17 . m a c r o m .
