User manual

3
FRONT PANEL
1.
Press this button to switch on the unit. When the system is on,
press this button to shut off the sound output and press again
to resume.
When the system is on, press and hold this button to turn off
the unit.
2/9. I<</>>I
In radio mode, press the keys to search for a station
automatically, press and hold to search for a station
manually.
In playback mode, press these keys to select the track you
want to play. Press and hold to active fast forward or fast
rewind search.
3/10. ▲ / ▼
In radio mode, press the buttons to select the previous or next
preset stations.
In playback mode, press the buttons to select a 10+or 10-
song.
A Picture viewing can be rotated by pressing the button.
4. AF/ >II
In radio mode, press this button to turn on or off AF function.
In playback mode, press the button to pause/start play.
5. VOL
Rotating: Rotate to adjust the volume level.
Press once: Press and rotate to select the functions provided.
Following functions can be accessed by press the volume
control knob; in the order specified:
VOL→BASS→TREB→BAL→FAD →SUBW
Rotate the volume control to change the setting of these
functions.
In radio mode, press and hold to enter system setup.
Press I<< / >>I button to select the BEEP, CLO ADJ , CLO
MODE, RADIO AREA and TFT BRIGHT settings and press
VOL button to confirm.
In BEEP mode, press the I<< / >>I button to select turn ON
the BEEP function, press again to resume.
In CLO ADJ mode, press I<< / >>I button to start the hour
setting or minute setting.
In CLO MODE mode, press I<< / >>I button to select 12H
or 24 H mode.
In AREA mode, press I<</>>I button to select one of the
following areas: EUROPE, USA, OIRT, JAPAN,M-EAST,
AUSTRALIA, LATIN and ASIA.
In TFT BRIGHT mode, press I<< / >>I button to adjust the
TFT brightness (0~20), the defaulted is 10.
In the above setting, press VOL button to confirm then press
VOL button again to exit.
6. REL: Press this button to release the front panel.
7. IR windows
8. MODE
Press the button to switch between the input modes.
11. AMS/BAND
In radio mode,
press once: To select one of the radio bands;
press and hold : To store the station into the memory in the
descending order of the instantaneous signal strength.
In playback mode, press the button to switch to audio list,
video list and picture list.
12. AUX IN
Insert audio cord, press MODE button on the unit to switch
to AUX mode.
13. TFT display
14. SD Card slot
Insert SD card, it will play the files of SD card automatically.
Note: Once the SD cards could not eject after pressing, just
take it out manually.
15. USB insert slot
Insert USB device, it will play the files in it automatically.