M-DVD5542R SRC NAV VOL VOL M-DVD5542R DVD RECEIVER 7” DISPALY OWNER’S MANAUL
Safety Precautions Never expose this unit, amplifier, and speakers to moisture or water for preventing electric sparks or fires. Only connect the unit to a 12-volt power supply with negative grounding. Please don't change the fuse on the power cord without professional guidance, using improper fuse may cause damage to this unit or even cause fire. Never install this unit where the operation & condition for safety driving is restrained.
Safety Precautions Contents (continued) Warning Safety Precautions........................................ 1 Features........................................................ 3 Panel Controls............................................... 4 Remote Controls........................................ 5-6 Basic Operations........................................... 7 Disc Operations........................................ 8-11 Tuner Operation.....................................
Features DVD-R/RW compatibility Button Operation Explanations It is possible to playback DVD-R/RW discs recorded with the video format and Video Recording format. Touch panel key operation It is possible to operate this unit by using touch panel key. Video CDs featuring PBC compatibility Some frequent operations 1) Move cursor It is possible to playback Video CDs featuring PBC (playback control). WMA and MP3 compatibility It is possible to playback WMA and MP3 files.
Panel Controls 10 POWER Press button (8) to open the panel. 11 12 13 14 VIDEO 2 IN (Yellow) AUX 2 IN-L (White) AUX 2 IN-R (Red) Press POWER button (6) to turn on/off the unit. 1. - Touch panel 2. - Remote sensor 3. - Mute 4. - Select the following sources: >Radio >Disc (when disc inserted) >USB (when USB connected) >AV1 (rear AV in) >AV2 (front AV in) >Bluetooth >Navigation 5. - Navigation 6. - Turn the unit on/off 7. - Press to adjust volume level. 8.
Remote Controls 1. - Select the following sources: >Radio >Disc (when disc inserted) >USB (when USB connected) >AV1 (rear AV in) >AV2 (Front AV in) >Bluetooth >Navigation 2. - Disc eject 3. - Menu (DVD) 4. - Title (DVD) 5. - Goto search 6. - Radio band - Video system PAL/NTSC/AUTO 7. - Sound/display setting - Setting menu (long press) 8. - System setup 9. - Close the panel step by step 10. - Open the panel step by step 11. - Zoom (DVD/VCD) - Dial/Receive call 12. - Enter 13.
Remote Controls (continued) Replacing the lithium battery of remote control unit When the range of the operation of the card remote control becomes short or no functions while operating, replace the battery with a new lithium battery. Make sure the battery polarity replacement is correct. 1. Open the back cover of the remote control unit. 2. Insert the button-type battery with the stamped (+) mark facing upward. 3. Close the back cover. Warning • Store the battery where children cannot reach.
Basic Operations Turn on/off the power When parking brake applied 1. Press POWER button to turn on the unit. T he unit goes back to the last status after power on. 2. W hen on, press POWER button to turn off the unit. 1. I f 'PRK SW' cable is connected to hand brake switch, the video display of the TFT monitor will be controlled by driving status, system setup and input video sources. 2.
Disc Operation Insert a disc Press on the panel to slide down the panel. Insert a disc into the slot, and the unit will change to disc mode automatically. Note: A - Turn to main source menu B - Display on screen control menu • Please confirm whether there is a disc in the unit before you insert another one. • The unit will exit current playing source and enter DVD mode when one disc is inserted.
Disc Operation (continued) Stop playback temporarily Repeat - During playback, press to pause playback. - The sound will be muted. - Display "PAUSE " in the TV screen. again to continue playback. Press T o r e s u m e n o r m a l p l a y , r e p e a t t h e operation. During playback, press REPT once or more. - RPT icon will appear on the display.
Disc Operation (continued) Program DVD Playback Menu - Press PROG to enter program list. Use / or / cursor and digit button to enter number. For DVD and File disc, select title and chapter number. For VCD and CD, select track number. to play, or move the cursor to - Press select "PLAY" and press ENTER to play. - If you want to delete the list, move the cursor to "CLEAR", press ENTER to delete all the list set before. - Press PROG again to exit program play.
Disc Operation (continued) Tuner Operation CD Playback Menu Radio Menu While playback touch the center of the screen: Touch to access desired function: 1. Display source menu. 2. Select previous/next preset station. 3. Touch to tune automatically. Press more than 2 seconds to tune manually. 4. Touch to select preset station 1-6. 5. Display select menu. 6. Hold it to scan preset stations . 7. Auto search and store stations. 8.
Tuner Operation (continued) TA Mode REG Mode Some RDS FM stations periodically provide traffic information. TP (Traffic Program Identification) Broadcasting of traffic information TA (Traffic Announcements Identification) Radio announcements on traffic conditions Source menu -> SETTING menu ->RDS Setting menu -> REG ON/OFF. REG ON: AF function will implement the regional code (of the PI) and only stations in the current region can be tuned automatically.
Bluetooth Operation Map Card and USB Operation Note: Using Map Card (SD/MMC Card) For your safety, avoid talking on the phone as much as possible while driving. 1. T o open the panel first, press the button on the panel. Insert a map card into the corresponding slot, the unit will load the map and switch to navigation mode automatically, then navigating by the touch screen. 2.
Bluetooth Operation Exit Pair A f t e r p a i r s u c c e s s fu l l y , i f y o u w a n t t o disconnect, press PAIR button. The TFT of the unit display “EXIT PAIR”, Bluetooth icon disappear. it, and then input the pairing code (“1234” by to default). When music playback, touch play/pause, and press / key on the TFT or remote control to previous/next track (if the options are available). Dial History After pair successfully, touch or press key on the remote control to dial out the last dialed number.
Bluetooth Operation General Notes for Bluetooth 3. ANSWER ON/OFF Set the automatic answering a call ON/OFF. When ANSWER ON and Paired OK, if there is an incoming call, in 15 seconds, the unit will answer automatically, and voice will be transferred to the unit too. When ANSWER OFF and Paired OK, if there is an incoming call, the unit will not answer automatically until you choose receiving or rejecting. 1.
side up Other Mode AV IN mode External peripheral devices with RCA audio and video outputs can be connected with the unit. For more details, please refer to < Electrical Connections>. NAV mode Navigation system can be supported by the MAP card connected with the unit. For more details, please refer to . GPS Antenna Installation Guide You can mount the GPS antenna in the car or out of the car.
DVD Setup Password: Press SETUP to display setup menu on the screen. Use to select setup items: SYSTEM - LANGUAGE - AUDIO - VIDEO 1. Press number button " 0000 " on the remote control, then press the ENTER button to confirm. 2. P ress the desired 4-digit password, and then press ENTER button to confirm. 3. Record the password and keep it in a safe place for future reference. SYSTEM If you forget the password, please enter 0000 to reset a new password.
DVD Setup (continued) AUDIO OSD Language Select one language that you are familiar with to display system menu. Audio Language Select one dialogue language that you are familiar with when playing back DVD discs. Note: If the DVD disc has the audio file in the selected language, the dialogues you listened to will be in the selected language. If the DVD disc does not contain the audio file in the selected language, the dialogues you listened to will be in the default language.
System Setup Sound Effect & TFT Setup Touch SEL on the TFT, or press SEL button on the remote control to enter SELECT menu. Touch the TFT or use remote control to adjust Audio/Video settings: Audio: EQ sound effect(Flat-Pop-Rock-Clas.-OFF)/BASS/TREBLE/BALANCE/FADER Video: BRIGHTNESS/CONTRAST/COLOR/DIM SETUP Menu Source menu -> Setting menu -> Setup menu Touch the adjust icon on left or right to select. Touch the up/down icon to access next/previous list. 1. Display Source Menu 2. List up/down 3.
Device Connections Notes of connection • I f an external power amplifier is connected, please don't connect P.CONT lead to the power lead of the external power amplifier, otherwise, electric spark or other damage may be resulted. • T his unit is designed to be used in a vehicle with a 12-volt battery and negative grounding.
Device Connections (continued) Parking Brake Cable Connections Reverse Driving Cable Connections 21
Electrical Connections Wiring Diagram SWC (to external device for Steering Wheel Control) GPS Antenna External Microphone AUX 1 IN-R (Red) AUX 1 IN-L (White) FRONT AUDIO OUT-R (Red) FRONT AUDIO OUT-L (White) REAR AUDIO OUT-R (Red) REAR AUDIO OUT-L (White) SUB.
Installation Guide I mportant: Remove the two screws on the top of the unit before installation, otherwise, the unit will not work. 1. If relevant, remove any other audio system from the car. 2. After unscrewing the four car radio attachment screws, insert the mounting sleeve into the dashboard. Fix it firmly in place by folding down the metal tabs. 3. If this has not already been done, attach the brackets (2x) to the car radio. In order to do this, use the supplied flat head screws (M5x6mm). 4.
Troubleshooting The following checklist can help you solve the problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Problem General Possible cause Solution Car ignition is not on. Cable is not properly The unit will not switch on. connected. Fuse is burnt. Volume is set at minimum or No sound the mute function is on. The unit or screen does The unit system is unstable. not function normally.
Specifications General Power supply 12V DC (11V-16V) Test voltage 14.4V, negative ground Maximum power output 45Wx4 channels Continuous power output 20Wx4 channels (4 10% T.H.D.) Suitable speaker impedance 4-8 ohm Pre-Amp output voltage 4.0V (CD play mode: 1KHz, 0 dB, 10K load) Fuse 15A Dimensions (WxHxD) - Chassis 178x100x164mm - Nose 170x105x21 Weight 3.0kg Aux-in level 300mV Sub-out 4.
PN: 127075002311
