Operation Manual

- 7 -
Aux In
Auxiliary Input
The Auxiliary Input Jack is on the front panel. Insert the AUX IN cable's stereo plug into the AUX
IN jack on the panel of the unit. Route the other end of the stereo plug to the headphone jack of
any external audio device such as walkman and discman. Press the Mode button to choose AUX.
Connect, any portable audio device such as a DVD player or VCD player to the AUX IN cable.
Use the volume control to adjust volume.
6
5
BND
MODE
TA
F/PS
AF
PTY
USB
SD
RESET
PWR/SEL
AUX
Radio/DAB operation
Radio Band
Press the BND Button anytime to access the radio function. The unit comes with five bands- three
FM Bands (FM1, FM2, and FM3) and two AM Bands (AM1, and AM2). Each of the five bands can
store up to six preset stations, for a total of 30 preset memory stations.
DAB Band
In DAB mode, press and hold BND button for 2 seconds in order to select DAB1/DAB2/DAB3. Note
that you have to save the preset stations.
Radio tune / Seek function
In Radio Mode, press and hold the
“>>|
” or
“|<<“,
manual seek will be activated and the radio
frequency will proceed by one step. Press the SEEK
|<<
or
>>|
Button once, and the radio will seek
the next strong and clear frequency station. Repeat to seek more stations in your listening area
with a strong signal.
Save preset station
There are six numbered preset buttons which can store and recall stations for each band. While
listening to a radio station you would like to save as a pre-set, press and hold one of the buttons
numbered 1-6 until the preset station number is shown. The button you pressed is now the pre-set
button for that station.
Auto Store / Preste Scan
A. Automatic Scan & Store While listening to the FM Radio, press and hold the F/PS Button for 3
seconds. The receiver will automatically scan and save the station listening to.
While listening to the AM Radio, press and the F/PS Button for 3 seconds. The receiver will
automatically scan and save the station you are listening to.
B. Scan Saved Stations Press the F/PS button once to perform the scanning functions. In FM
mode, press the F/PS button and the stations in that FM band will be scanned; press the button
in AM mode and scan the band stations of that AM Band.
C. Select or Scan DAB stations In DAB mode, press F/PS in order to see the LIST. Rotate the
volume knob to check the list of DAB stations that are received. Press the volume button to
play. Press and hold the F/PS button to activate SCAN function. The unit will scan and save the
available DAB stations.
M-DL3200D User manual_ENG.indd 7 23/07/2018 15:31:56