Technical data

87
Contd… Should include Pressure platen, without the use of screws or clamps, Power Leads. mechanism.
Model 8130 Specification Of Power Supply
Power Supply : 1 to 300 V, @ 1V, 1 to 400 mA, @ 1 mA. Automatic Crossover
Maximum Output : 50 VA
Timed Output : 1 to 999 minutes, @ 1 min. alarm buzzer or Continuous output
Display : 3 Digits. 1 Line for Voltage. 1 Line for current and time selectable.
Power outlet : 2 pairs in parallel. Power Failure Detection (PFD) function.
Automatic Recovery System Safety protection : automatic output shutdown, against short or open circuit, with alarm buzzer



ATTO, Japan make : Plate size – 18 × 16 cm.,
It should have Dual gel casting stand with leveling base and level. Buffer dam
Plate separation tool Heat exchanger and buffer circulator 0.75 mm and 1.00 mm thick spacers 15 well, 0.75 mm thick
comb (2 Nos.) 15 well, 1.00 mm thick comb (2 Nos.) 20 well, 0.75 mm thick comb (2 Nos.) ix) 20 well, 1.00 mm thick
comb (2 Nos.) x) 4 sets of glass plates xi) 18 × 16 cm club sandwich divider (2 Nos.) xii) All the essential accessories
Unit of seie-plas UK base company, Bitron. The Instrument is highly sensitive and is suitable for PEQ Laboratory.
OR
Make Scie-plas : Model-HU-13W
Unit dimension – 30 x 30 x 6.5 cm, Gel dimension – 23 x 14 cm, Runs up samples-200, Combs-12,16,20,24,28,40,50,
Thickness 1, 1.5 and 2.0 m.m., Gel casting tray- 20 x 14 cm, 2 cambs – 25, samples- 1mm, Buffer- recirculution pert,
colour code stripe, Polyacrylomite, agarose, external gel casting unit,
operating temp – 4 to 65
0
C.