Technical data

147.

Electro Blotting System

Electro Blotting Unit with Power Pack , Biorad, USA

Electrophoresis Blotting Systems. Mini Trans-Blot Cell, Cat. No. 170-3930

Mini-Trans blot Electrophoretic Transfer Cell

Includes: 2 Gel Holder cassette, 4 fiber Pads, Modular electrode assembly, Bioice cooling unit, lower buffer tank, lid

with cable, instruction. Cat No. 1645050 Power Pac Basic Power Supply, 220/240V Specification

Output Range:-

10-300V, fully adjustable in 1 V steps, 4-400mA, fully adjustable in 1mA steps75w maximum

• Type of output : Constant voltage, constant current with automatic crossover

• Output Terminals: 4 pair recessed banana jacks floating in parallel

• Timer : 1-999min, fully adjustable, Pause/resume run function : Yes, Display : LED

• Operating conditions: 01-40 deg C; 0-95% humidity in the absence of condensation

• Safety compliance : EN-61010

• EMI : Conforms to CE standards for Emissions and Immunity class A, tested only at 230V; TUV EMC certification

• Safety features : No load detection, sudden load change detection, overload/short circuit protection, input line

protection, auto power up after power failure

• Input protection : Fuse on both hot and neutral

• Input power (actual) : 90-120 or 198-265 V AC, 50 or 60 Hz, Autoswitching

• Dimension : 21x24.5x6.5cm (WxDxH),

• Weight : 1.1 kg

A)VS 10CBS Complete system for Mini Vertical (10x10cm) Electrophoresis and Blotting Comprising

1x omniPAGE Mini Vertical Unit which includes: 2x2mm thick

Notched glass plates, 2x2mm thick plain glass plate with 1mm

Thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 12 samples),

1x casting base, silicon mat, cooling pack.

Plus: 1x Electroblotting module which includes : internal electroblotting module,

3x compression cassettes for gel sizes up to 10x10cm and 6x fibre pads.

B) VS 20CBS Complete system for Maxi Vertical(20x20cm) Electrophoresis and Blotting Comprising

1x omniPAGE Maxi Vertical Unit which includes: 2x4mm thick

Notched glass plates, 2x4mm thick plain glass plate with 1mm

Thick bonded spacers, 1x dummy plate, 2x combs (1mm thick 24 samples),

1x casting base, silicon mat, cooling pack.

Plus: 1x Electroblotting module comprising : internal electroblotting module,

3x compression cassettes for gel sizes up to 20x20cm and 6x fibre pads.