Technical data

8
Optional Items:
Following items to be selected as per requirement and not included total Ex-work value. Discount @ 25% is applicable on
all the items below.
12 . 0990-2147 End Cap O-Ring
13. B315-0531 Spacer
14. 0303-1573 Burner Head Cleaning Tool
15. 0303-0997: System 2 EDL Driver Assembly. Driver assembly is required for each position in the lamp mount where a system 2
EDL is to be used.
16. N305-0108: Coded H C Lamp – B.
17.N305-0114: Coded H C Lamp – Ca
18. N305-0118: Coded H C Lamp – Co.
19. N305-0119: Coded H C Lamp – Cr.
20. N305-0121: Coded H C Lamp – Cu.
21. N305-0144: Coded H C Lamp – Mg.
22. N305-0145: Coded H C Lamp – Mn.
23. N305-0146: Coded H C Lamp – Mo.
24. N305-0148: Coded H C Lamp – Na.
25. N305-0152: Coded H C Lamp – Ni.
26. N305-0172: Coded H C Lamp – Se.
27. N305-0191: Coded H C Lamp – Zn.
28. N305-0634: E D Lamp – Mercury
29. N305-0657: E D Lamp – Lead
30. N305-0126: Coded H C Lamp – Fe.
Optional Items:
Following items to be selected as per requirement and not included total Ex-work value. Discount @ 25% is applicable on
all the items below.
Essential items required to run the system
1. Exhaust Hood System with S S tubing for Atomic Absorption Spectrometer
2. Acetylene gas cylinder
3. Acetylene gas
4. Nitrous Oxide Gas Cylinder
5. Nitrous Oxide Gas
6. Printer
7. 3.5 KVA Stabilizer with under and over protection