Technical data

79
145. Electroporator
• Electroporator capable of transformation in wide range of bacteria by high voltage electroporation (1000-2500 V
common) into resistant media (10% glycerol).
• Delivers optimal pulse for electro-transformation with 5 M sec time constant from fixed resistor and capacitor
• Use 0.1ml cuvettes for optimal high field strength
• Microprocessor controlled, calculated and display system
• Power supply 220V/60 Hz
OR
Bio Rad, U.S.A. make
A) Cat No. 165-2100 MicroPulser Electroporator, Include a cuveetes chamber with leads, 10 sterile cuvettes(s each of
0.1 ch and 0.2 cm gap)
Specifications –
Input Voltage : 100-120 V or 220-240 V
Maximum output voltage and current: 3000 V peak into > 600 W
Load ; limited at 100 A peak maximum .
Out put Waveform : Decaying or truncated – decaying expoantial waveform with RC time constant Output
Voltage and Pulse duration adjustment : Voltage adjustable
In 200-3000 V range with 10 V precision : 50ms default or 1-4ms with 0.1ms precision ; 5 bacteria and 5 fungal preset
programs.
Ambient Operating Temperature : 3.5-35 Deg. C
Dimentions : (W x Dx H ) 29 x 21 x8cm
Weight : 2.9 kg
B) Cat No : - 1652088 Gene Pulser Cuvettes 4 mm electrode gap .50 sterile
C) Cat. No : - 1652086 Gene Pulser Cuvettes 2 mm electrode gap .50 sterile
D) Cat. No : - 1652089 Gene Pulser Cuvettes 1 mm electrode gap .50 sterile
146. ETC Solar Water Heater Svam Systems make OR MNES/ MEDA/ MNRE approved any make, 250 lpd, evacuated tube collector with all glass
concentric dual tube geometry, borosilicate glass conforming to ISO 3585, outer tube dia. 47mm (+/-) 0.7mm, inner tube
dia. 37mm (+/-) 0.7mm, tube length 1500 mm(+/-) 5.0 mm