Technical data

5
14. Atomic Absorption
Spectrophotometer
LABINDIA Make Flame Version
AAS LABINDIA make Flame & Graphile Version
Analyet model LCD display
Essential items required to run the system
Optional items required to run the system/
OR
RAYLEIGH Make
Technical Specification
Wavelength range :190-900n
Background correction : The D2 lamp background correction capability at
1A is better than 30 times.
: The S-H background correction capability at 1.8A
is better than 30 times.
Lamp turret : 6-lamp turret (Two high performance HCLs can
be mounted on the turret to increase the
sensitivity in flame analysis,); auto alignments;
auto fine adjustment; fully automated scan and
peak- picking
Lamp power supply mode : Powered by two pulses: 400Hz wide pulse and
100Hz narrow pulse
simultaneously.
Monochomator : Czerny-Turner design grating monochromator
Grating : 1800 lines/mm
Focal length : 277mm
Blazed Wavelength : 250nm
Spectral Bandwidth : 0.1nm, 0.2nm, 0.4nm, 1.2nm
Flame/Graphite Furnace : Flame and graphite Furnace atomizer automatic
changeover
Detection Detector : Photomultiplier with high sensitivity and wide
spectral range.
Temperature range : Room temperature -3000
0
C
Light control temp.range : 1500
0
C-3000
0
C, temp. auto-correction
Temp. control accuracy : <
1
0
C
Condition reading : With model function
Result printing : Measurement data and final analytical report
printout.
Heating rate : 2000
0
C/s