Technical data

Contd….

Compound Microscope with software facilities : Olympus make

Microscope (Tribocular with photoport) combined reflected florescence and transmitted light modes, phase constract attach/dark

field equip and digital photomicrography system with Nikon camera, 100 x objective, Irish diaphram and substage condensor (N-A

1.33 for oil immersion). Video projection system with high resolution digital C-C-D camera adopter, power pack and 14” coloured

monitor, filar micrometer for precision measure of particle size, measure eye piece 10 x WF eye piece with graticule glass cell,

spare halogen bulk 6-20 watt or 12 V 20 W, fuse glow blow type and other accessories for phase contrast, huorescence dark field,

light microscopy lense system, interchangeable and compatible.

84. Compression Testing Mach

ine With Computer Interface

BROOKFIELD TEXTURE ANALYSER

QTS OR CT3 5, 10, 25, 50 KG LOAD RANG

• LOAD RANGE : 0-5KG, 0-10 kg, 0-25 KG, 0-50KG.

• LOAD RESOLUTION: 0-5KG, 0-10 kg, 0-25 KG, 0-50KG IN 1G INCREMENTS

• LOAD ACCURACY: BETTER THEN 0.1% OF FULL SCALE +/- AT 50KG

• LOAD REPEATABILITY: BETTER THEN 0.1% OF FULL SCALE

• POSITION RANGE:100 MM-520MM

• POSITION ACCURACY: 0.02MM +/-0.1% OF SET DISTANCE

• POSITION SETTING RESOLUTION : 0.01MM

• POSITION MEASURING RESOLUTION : 0.1MM

• TEST SPEED RANGE: 10-1000 MM/MIN0.17-16.7 MM/S

• TEST SPEED ACCURACY: BETTER THAN 0.1% OF FULL SCALE

• SPEED ACCURACY: BETTER THAN 0.1% OF FULL SCALE

• TEST MODES: SINGLE, HOLD,REPEAT/TPA,CYCLE

• MAXIMUM NUMBER OF CYCLES: 255

• DATA OUTPUT OPTIONS: ANALOGUE CENTRONICS PRINTER RS232 SERIAL

• DATA ACQUISTION: 26 DATA SETS PER SECOND

• PROTECTION: LOAD CELL OVERLOAD PROTECED BY

ELECTRONIC STOP IN BOTH DIRECTION AND BYMECHANIAL STOP IN COMPRESSION.

• APPROVALS: CE MARKED.

• SECURITY: SOFTWARE PASSWORD DIFFERENT LEVELS OF USER

• ATMOSPHERE: NORMAL LABORATORY CONDITION.PROTECTION IS REQUIRED FOR EXCESSIVE DUST.

• OPERATIONG TEMPERATURE:5

C TO 35

• POWER SUPPLY: 85-264 V AC 50/60Hz

• POWER CONSUMPTION: 150W

IT IS SUPPLIEDWITH CONTROLLER KAYPAD, RS232 INTERFACE,

PRINTER OUTPUT,POSITION CALIBRATION ROD,

SET OF EXTENSION RODS, OPERATING MANUAL POWER CODE.