Technical data

133
247. LCD Projector Sony make: 3 Models
1. VPL-EX 5
248. Laboratory Scale Controlled
Atmospheric Facility
Labultima, Mumbai
Model- 1. WP-3500/TX-800 Multichannels Wall Mounted Micro Controller
2. OX-100 3 Wire Transmitter For 0 to 25% V/v
3. Tax-100-CO
2
CO
2
Gas Transmitter
The system comprises of 4 Nos. of Chambers with M
MOC : SS316, Capacity : 1 m3 each
Chamber Parameters : Temp : 0 to 10
0
C, RH : 65 to 90%,
Gas Detection System : O2 detection Range : 0 to 3%, CO2 detection range : 0.5 to 1%
249. Laboratory Spray Drier A) Spray drier model No. LCJ 227, Evaporation rate of water 1 liter/hour, air inlet temperature ambient to 250
0
C.
Heater capacity-1.5 to 2.5 Kwatt, Spray system- Co-current, 0.5/0.7/0.1 mm jet.
Spray model No.: LCS – 222, Evaporation rate of water 1 litre/hour, air inlet temperature ambient to 250
0
C. Heater
capacity-1.5 to 2.5 KW, Spray system- Co-current, 0.5/0.7/0.1 mm jet.
OR
LABULTIMA Laboratory Spray Drier Model LU 222, LU 228, LU 227 Advanced
Evaporation Rate - 1000 /1500 / 5000 / 10000 ml of water evaporation / hr
Drying Chamber diameter – 6” or 9”, Cyclon Separate System – Twin Cyclon, Air Heater - 1.5 kw made of
Incolloy 800, Controlled through microprocessor, Air Compressor - Non Lubricated - two stage compressor
The software provided should be in compliance with US FDA 21 CFR Part 11
The system must be provided with RS 485/232 port with two way communication with users PC
configuration with a option to operate the spray drier from MMI keypad or from PC configuration.
The equipment must be compliant with Health & safety Requirements of the EC Directives as per EN 61010 -
1 : 2001 & EN 61326 - 1 : 1998 standards & should be CE or UL ® Certified.