Technical data

132
246. LF Plus 1 KN Universal
Pacakage Testing Machine
(Packaging)
LLOYD Instruments
Model – LF PLUS E- Single Column
Capacity- 1KN, Travel- 750 mm, Speed- 0.05 to 1270 mm/min, Max Return Speed- 1270 mm/min, Speed Accuracy-
<0.2% at Steady State, Extension Resolution- <2 Microns, Data Sampling Rate- 8KHZ, 32 Bit Microprocessor, 4 line
LCD Display, Constant load holding, Data Outputs: Digital - RS232, Grip protection setting in console, Pre-loading of
samples and cycling to load or extension limits, Multi-unit display options, Multi-lingual display options, 10 step load
calibration facility, Having Facility to store 600 Test Results in the console, 10 Test setup creation facility in the console,
Extensometers Inputs- Digital & Analogs, Load Measuring System- EN ISO 7500:2004 class 0.5 ASTM E4, Throat
Depth- 179mm, Supply Voltage- 230Vac +/- 10% 50-60 Hz single Phase, Maximum Power Requirements- 500VA
Max., A series of highly accurate, interchangeable load cells available for tension, compression and cycling through zero
force measurements., Extensive range of grips and fixtures support virtually any type of test.
SOFTWARE FOR DATA COLLECTION SPECIFICATIONS
Nexygen Plus Software Multi- lingual Material testing software, Should supplied with all inclusive package for Tensile,
Peel, Seal, BOND, COF, Puncture test with no additional modules, Includes complete ASTM/ISO standard library,
Complete suite of test set-ups, Video & Still picture capture system, Security & audit trial utility- Module can also
configured to FDA 21 CFR Part 11 Compliance
Requirements. Electronic Signature & the ability to restrict user access rights, SPC trend & histogram charts, User
Interface customization facility, Data export utility for connection to LIMS & SPC packages, Load System Compliance
Compensation, Test Automation & Customization facility, Automatic report generation in Word & Excel format,
PASS/FAILED limits,
LOADCELLS SPECIF
ICATIONS
Capacity 500N, Self identifying XLC loadcell, Load Cell Accuracy <0.5% calibration with certification, Diagnostics
mode for loadcell overload facility storage, Load cell protection setting in console & software, The loadcell value &
sensitivity factor stored in loadcell plug
MANUFACTURER'S ACCREDIATION
Manufacturer should have ISO 9000: 2000 for manufacturing *, ISO Accrediation for Software *,CE Accrediation for
safety
GRIPS
TG 34- Vice Grip for Tensile, Peel, Seal Test,,COF Testing Grip with Bed & Sled,,TG 73/50 Puncture grip with aperture
dia 50mm & probe dia 20mm
CVT
500 VA CVT
COMPUTER
Suitable computer for Software operation & Windows operation.