Technical data
106
Contd…
OR
Alpha Innotech/FC2 system
a) 1.92 mega pixel resolution cooled CCD camera for image acquisition
- 1600(H) X 1200(V), 1.92 million pixel resolution cooled CCD camera with 7.4X7.4 micron well capacity pixels, greater than 75
dB signal to noise using KAI-2020M chip with full 16 bit image acquisition delivering 16 bits of data in a 16 bit file format;
measurable performance exceeding 4.8 OD using standardized luminescence plate.
- 1x1, 2x2,4x4, 8x8 pixel binning CCD architecture capabilities,
- b) Fast Optics
- Standard zoom lens 28-70mm, - Field of view F2.8
- At 28mm 29x29cm - At 70mm 12x12cm
c) Interference filters for fluorescence, colorimetric and chemiluminescence
Custom interference filter, suitable for documentation of Ethidium Bromide or SYPRO
TM
– orange stained DNA/RNA agarose and
acrylamide gels, coomassie blue or silver stained protein gels, film, or membranes
195.
Gel Imaging and Spot
Picking workstation (with
software for 2D analysis)
Fuji Film,Japan, Model : LAS 4000 / KODAK Model IS 4000 MM Pro
Specifications for Luminescent Image Analyzer for chemi/bioluminescence and wide range of fluorescence detection by
various light sources:
System should be the top-end model of reliable, high-resolution Image analysis series as well as user friendly.
to capture imaged from distances as short as several tens of centimeters. SIGMA wide-view lens is also preferable
196.
GLC (Gas liquid
chromatography)
With the required accessories, columns and standards :
Shimadzu Gas Chromatography, Model: GC- 2010A
1. 221-71023-34
Microprocessor based GC for high speed/ultra-fast analysis operation on 220V/50Hz includes split/split less injector with AFC
(Advance flow controller) 0.1 to 0.53 mm capillary column connection, High Power Oven, temperature up to 450
0
C
1. Temperature programming : 20 steps,
2. Additional Split/Splitless injector with AFC SPL 2010
3. Detector
C) ECD detector P/N : 221-48426-38, ECD Controller P/N : 221-47733-92
Max.Temperature : 400
0
C , Detection limit : 8 fg/sec (Y BHC)
C) NPD (FTD) detector , P/N : 221-47732-38, Max. Temperature : 450
0
C
Sensitivity/Min Det limit : N-0.3 PgN/s, P-0.03 PgP/s
4. Auto injector AOC 20D (includes dual auto injector and auto sampler AOC 20S) P/N : 221-71213-38
5. Vials with septa and caps (100 pcs/pkt) P/N 221-34274-91
6. GC Solution software (32 bite with GLP compliance) P/N : 223-06290-92
7. Septa- (20 pcs/pkt) P/N : 201-35584
8. Graphite Ferrule 0.5 mm (10 PCS/pkt) P/N : 221-32126-05
9. Graphite Ferrule 0.8 mm (10 PCS/pkt) P/N : 221-32126-08
10.Standard sample for ECD (one vial) P/N 221-44247-63
11.Standard sample for NPD/FTD (one vial) P/N : 221-44247-67