Installation manual

Page 6
Check Your Shipment, What's Included For eco6 Guard Fan
Motor Mount Assembly
Motor/gearbox, Hybrid Hub, and keyless bushing adapter
attached to motor mount
If ordered without safety screens, the Hybrid hub cover,
hub safety system, and blade struts will also be attached to the hub.
Wall Mount Assembly
V-shaped (roughly) wall mount
Pivot mount (attached to wall mount)
If the fan is ordered with screens, the following will be in the box.
Safety cable
Safety cable bolt kit
Blade bolt kit
Keyless bushing adapter
Bolts and washers to attach keyless bushing adapter to hub
Packet of bolts, nuts, and washers to attach rear screen to motor mount Packet of
large sheet metal screws to attach front screen to rear screen
Hub cover
Screws and star washers to attach hub cover
Solid Steel Blade Struts
Solid Steel Blade Struts to Hybrid Hub bolt pack
If the fan is ordered without screens, the following will be in the box.
Safety cable
Safety cable bolt kit
Blade bolt kit
Blade safety links and safety link extenders
Eco6 Guard Fan
Variable speed models include a control panel, remote, remote wire, motor cable and cable glands
(same as regular fan). Single speed models will have an AG Starter and AG Starter enclosure with instruc- tion manual
and warranty card loose rather than in the MCP box.
All the above is in the power unit crate.
If the fan is ordered with screens, they will be on a separate pallet.
Blades will be on a separate pallet.
Call MacroAir at 866.668.3247 if you have any questions
MacroAir, Inc. www.macroairfans.com Toll Free: 866-668-3247 Build: March 2012