User's Manual

2. Highlight a channel that you want to edit, then click Edit button.
3. The below window wil be shown.
Type a name that you want to input, and click OK. If you want to display the channel name on the main
control panel, go to "Config Panel/VGA Setup/Miscellaneous" to choose "Show Channel Name".
(
refer
to VGA Settings
)
Multi-mode on an Antenna :
One Antenna input may receive both cable channel and air channel. In this case, after
option checking, press auto search to investigate all air and cable channel.
- Virtual Channel mode can be setup and canceled by "Virtual Channel Mode" button in the Channel
Box
- When using virtual channel mode, virtual channel number is used rather than physical number in
digital broadcasting. Furthermore, Select channel's name automatically by channel name in virtual
channel information
. Favorite Channel Mode : This switches to Favorite Channel Mode, Pressing Up/Down button will only change channels in the "favorite
channel box ".
To add/delete channels to favorite channel box:
1. Choose a channel number in the "Scanned Channel" box.
2. Click on >> button.
The channel is added in the favorite channel box.
To delete a channel from the favorite channels:
1. Choose a channel number in the "favorite channel box".
2. Click on << button.
The channel will be deleted from the "favorite channel" box.
To change the sequence of favorite channel list, click up/down in the "favorite channel" box.
To set the configure of MyHD program:
1. Click "Config" in the expanded main control or
2. Click right mouse button/pop-up menu/Config Panel then, Config Panel window will be displayed.