User's Manual

Ma c r o I ma ge Te c h n o l ogy
MyHD
Ma c r o I ma ge Te c h n o l ogy
MyHD
Hardware installation Overview
 Turn off your PC, install the MyHD PCI card, connect the audio jumper cable as needed, and
connect the Remote Control Receiver to a serial port on your PC.
 Connect the MyHD PCI card to an external video source and display devices as desired.
 Turn on your PC and install the MyHD Windows device driver from the installation CD, then
install the MyHD application software.
 If DirectX 7.0 or higher version is not installed on your PC, install the latest version of DirectX
before the installation of the MyHD device driver.
To install MyHD on your Windows 98SE, Windows ME, Windows 2000, or Windows
XP system:
3 4
MyHD Hardware InstallationMyHD Hardware Installation
MyHD board diagram
Antenna 1
Antenna 2
A/V Connector
SPDIF Output
Audio Output
 Antenna 1
Recommended to connect the antenna lead from your rooftop antenna
 Antenna 2
Recommended to connect the antenna lead from your cable antenna
 A/V Connector
Connector to connect A/V cable
 SPDIF Output
Allows the digital audio output of the MyHD card to be connected to an external audio
amplifier.
 Audio Output
Allows the analog audio output of the MyHD card to be connected to the LINE IN, AUX or
CD input of your PC sound card or motherboard(using the enclosed jumper cable).
MyHD Hardware InstallationMyHD Hardware Installation
 VIP 1.1 Connector
This connector is not currently working.
VIP 1.1 Connector