User's Manual

Ma c r o I ma ge Te c h n o l ogy
MyHD
Ma c r o I ma ge Te c h n o l ogy
MyHD
49
Still Image Capture is capturing a still image as a file of bitmap.
To execute Still Image Capture, select “Config Panel”/”Capture Setup” then check the box of
“Still Image Capture.”
In Detailed Options, either Field or Frame Mode can be
selected.
When the capture button, capture menu, or
record button is used, following images are displayed
in a window as small images(example).
To view a large image, double click
the small image.
Click Save to store the image as a bitmap file.
HD Mode & Overlay window Mode
MyHD supports output of graphic card and HD output in a monitor
(refer to page 8 for Hardware Settings)
To view the HD mode;
1. Select HD mode from the pop-up menu, or
2. Click HD button in the main control panel, or
3. Double click the left side button of a mouse on the overlay window
To exit the HD mode;
1. Double click the left side button of a mouse, or
2. Hit Esc key in a keyboard
To use the remote controller;
HD mode and an overlay window mode is worked by HD button on the remote
controller.
Running MyHDRunning MyHD Running MyHDRunning MyHD
50
Still Image Capture
Tape Record
For Tape recording;
1. Select ”Config Panel”/”Capture Setup”/”Tape”
2. Click “Capture” from pop-up menu, or
3. Use the main control panel