User's Manual

Ma c r o I ma ge Te c h n o l ogy
MyHD
Ma c r o I ma ge Te c h n o l ogy
MyHD
47 48
Avi Capture
To execute Avi capture, select “Config Panel”/”Capture Setup”/“AviCapture.”
 Capturing
Use the capture button in the main control panel
or the record button on the remote control Hanset
To record broadcasting program as an avi format.
File names are automatically selected by the
following format ( “MMDD-HHmmss.avi” ,
MM:month, DD:date, HH:hour, mm:minute,
ss:second).
To stop the capturing, use the same method with
capturing transport Stream.
 Avi Capture after Capture time is selected
Execute same method with Transport Stream Capture after Capture time is selected .
During Avi capture, the size of file
cannot be limited.
The captured avi files can be replayed
through Windows Media Player.
To storing Transport Stream, Transport Stream Capture must be selected from
“Config Panel”/”Capture Setup”/”Capture Mode.”
 Capturing
Use the record button on the remote controller or the capture button in the main
control panel for storing the stream into a destined file.
To stop the capturing, use the record button on the remote controller or the
capture button in the main control panel again.
The record button on the remote controller can be used for capturing in HD mode.
 Transport Stream Capture after Capture time is selected
To decide a capturing time, select Capture from the below pop-up menu.
1. Type a desired capturing time in the Capture time box.
2. If you type “0,” the capturing will be executed as long as possible.
3. To stop the capture, use stop button on the remote controller.
Running MyHDRunning MyHD Running MyHDRunning MyHD