User's Manual

Ma c r o I ma ge Te c h n o l ogy
MyHD
Ma c r o I ma ge Te c h n o l ogy
MyHD
37 38
Setting the display options of an overlay window in VGA Setup.
Fixed Aspect Ratio
If “Fixed Aspect Ratio” is selected, the ratio of an overlay window is fixed even size of the
window is changed.
Overlay Mode
Setting a mode of an overlay window in Windows.
 VOP 30 fields/sec
30 fields of images in a second.
Basic mode of an overlay window
 VOP 60 fields/sec
60 fields of images in a second.
This mode will display more smooth motions than
30 fields/sec and it requires higher specification of PC.
(It might not be supported by performances and specifications of graphic card.)
 VOP 30 frames/sec
30 frames of images in a second.
Vertical resolution is twice higher than 30 fields/sec.
It requires higher specification of PC.
(It might not be supported by performances and specifications of graphic card.)
 VOP 60 frames/sec
60 frames of images in a second.
The best quality of video will be displayed by this mode and higher specification of PC is
required. (It might not be supported by performances and specifications of graphic card.)
To set Audio configuration
 Audio Output
1. Cable Out (only for analog broadcasting) :
To use the cable output, audio output of MyHD and a sound card must be
connected(refer to Hardware Settings on the page6). If Cable Out is selected,
audio output of analog broadcasting is worked by a cable even though Wave is
checked.
2. Wave : Audio output of digital broadcasting through a sound card without a cable.
Wave must be selected for Audio output of digital broadcasting.
3. SPDIF: SPDIF is used for an Audio Amp(refer to Hardware Settings on page 10).
 Analog Audio
Choose either Stereo or Mono mode.
 Bilingual
You can choose Main or SAP only if Mono mode is selected.
A/V SettingsA/V Settings VGA SettingsVGA Settings
Setting Audio Configuration