User's Manual

Ma c r o I ma ge Te c h n o l ogy
MyHD
Ma c r o I ma ge Te c h n o l ogy
MyHD
MyHD Program InstallationMyHD Program InstallationMyHD Program InstallationMyHD Program Installation
Setting windows environment
 Warning
Don’t change resolution of screen area in “display properties”/”settings” while the MyHD
program is executing.
 If the monitor is connected to VGA card
through VGA loop through cable with
external A/V connector, confirm display
properties.
1. Choose “Control Panel”/“Display”.
2. Choose “Settings”/“Advanced” in display
Properties.
3. Choose “Monitor” and then uncheck
“Automatically detect Plug & Play monitors.”
15 16
Installing the MyHD device driver for Windows XP
After your hardware installation has completed, turn on your PC and insert the installation
CD. As Windows begins to boot, it will automatically open the “Found New Hardware
Wizard” once it detects your addition of the MyHD card:
 Choose “Install from a list or specific location
(Advanced)” and click on “Next >”.
 Choose “Search for the best driver in these
locations” and “Include this location in the
search,” then click on Browse to open the
contents of the installation CD, navigate to the
DRIVERS folder, and choose the subdirectory
for the version of Windows currently installed
on your computer and click on “Next >”.
Note: you must choose the driver which
matches your operating system as software
designed for one version of Windows may not
operate properly on another.