User's Manual

MyHD Enjoy digital life with your PC
- 2 - Macro Image Technology,Inc.
l Finally, if necessary, an updated Windows Direct X Driver can be installed from the
MyHD Installation CD-ROM
2.2 Install MyHD card
To install MyHD card, follow the steps listed below:
1. With the power off, remove yo
2. ur computer cover and locate an available PCI slot.
3. Remove the screw attached to the bracket cover and remove the bracket plate.
4. Before handling the MyHD DTVPC card, ground yourself by touching the power supply
box inside your computer.
5. Position your card directly above the PCI slot and insert the card firmly into the slot. Care
should be taken to press it evenly and snugly into its slot.
6. Once your MyHD DTVPC card is installed properly in its slot, secure it to the computer
frame with the screw you removed in step 2.
Warning - Static Sensitive Components
To avoid possible damage to MyHD DTVPC card and/or other system components from static
discharge always discharge your body’s static electricity prior to handling MyHD DTVPC
card or other system components.
Discharging can be done either by using a properly grounded anti-static wrist strap or by
simply touching the chassis of a grounded (plugged-in) computer. In addition, always handle
the card by its edges whenever possible, to avoid mechanical damage to delicate components on
the board.