User's Manual

MyHD Enjoy digital life with your PC
- 1 - Macro Image Technology,Inc.
1. SYSTEM REQUIREMENTS
To achieve optimum performance of the MyHD Board, your PC requires a minimum
configuration.
This chapter provides the system requirements. This chapter contains the following sections:
1.1 PC Platform Requirements
The minimum requirements for you PC platform are listed below:
CPU : Pentium-II 333MHz or faster
DRAM : 64 Megabytes or Higher
System Bus : PCI
Operating System : Windows 98 Second Edition. , ME
Other Software : DirectX Media 6.0 Runtime
VGA : DirectX compatibility VGA card
(8 MB memory or higher recommended)
2. HARDWARE INSTALLATION
The MyHD boards are Plug-and-Play devices designed for Window 98SE and ME.
Plug-and-Play simplifies the installation and hardware setup of MyHD by having hardware
settings assigned by Windows, instead of needing to set jumpers. This chapter describes how to
install these boards and how the automated Plug-and-Play installation procedure works .
2.1 Installation overview
To install MyHD under Windows 98SE or ME, you will follow these steps:
l Install the MyHD board in your PC
l After booting Windows, you will install MyHD’s Windows device driver from the
MyHD Installation CD-ROM
l After the Windows driver is installed, you will then install the MyHD application
software from the MyHD Installation CD-ROM