Instruction manual

66
Click on this icon to call up remote Software Upgrade dialog. Please select the DVR device
and upgrade file in the PC and then click on Start button to start the software upgrade process.
The Upgrade status will be updated according to the progress. When the upgrade file is
uploading, the user may click on Stop/Close button to stop the upgrade process.
Note : There must be at least one formatted HDD in the DVR for the remote upgrade to
succeed. After the software in the DVR is upgraded, the DVR will restart immediately
and the PC will be disconnected from the DVR. Please do step 7 in Before Logging On
and then re-run the Internet Explorer to connect to the DVR again.
System Requirements of Remote PC
It is recommended to access the digital video/audio recorder using a PC that meets the
following system requirements. If you use a PC that does not meet the following system
requirements, it may cause problems such as slow imaging or the browser unable to operate.
 PC
IBM PC/AT compatible.
 CPU
Intel
®
Pentium
®
4, 1.4 GHz or above.
 OS
MicroSoft
®
Windows
®
XP or Windows
®
2000 with SP4.
 Monitor
1024 x 768 or above.
 Memory (DRAM)
512MB.
 Network Interface
Ethernet, 10/100 Base-T.
 Web Browser
MicroSoft
®
Internet Explorer
®
6.0 or above.
 DirectX
MicroSoft
®
DirectX
®
9.0 or above.